LumberJocks

Reply by firefighterontheside

  • Advertise with us

Posted on Jointer in feed out feed system.

View firefighterontheside's profile (online now)

firefighterontheside

5040 posts in 553 days


#1 posted 03-05-2014 02:02 PM

I had a bench top jointer and tried to joint some 6’ boards for a table top. I made some make shift infeed and out feed supports. It didn’t go well. I was very frustrated with it. Ended up getting the best results as described by pmayer with the table saw. I decided the next step was to get a larger longer jointer. Now I can joint longer board much easier. I got mine for 225 and have seen them cheaper. If you intend to keep working with construction lumber, I would strongly encourage a long bed jointer.

-- Bill M. I love my job as a firefighter, but nothing gives me the satisfaction of running my hand over a project that I have built and just finished sanding.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase