Reply by Woodchuck1957

  • Advertise with us

Posted on outfeed table problem

View Woodchuck1957's profile


944 posts in 3733 days

#1 posted 04-13-2009 07:39 PM

I have the older version of your saw with a Delta 50-390 outfeed hardware kit for it. I used 3/4” MDF for the top and framed it with another layer of 3/4” MDF notched for the motor. A longer V-belt might drop your motor some, and or adjust the motor on the mount, that may give you better clearance, but I wouldn’t drop it too far. If you have a Fenner Drives PowerTwist link V-belt you can easily fine tune the length.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics