LumberJocks

Reply by BArnold

  • Advertise with us

Posted on Making my own veneer questions

View BArnold's profile

BArnold

175 posts in 1858 days


#1 posted 12-30-2013 03:33 AM

I’ve resawn veneers to 1/8” with a 1/2” Woodslicer with no problem. Next, I run them through my drum sander to 1/16”. I originally bought a Timberwolf on advice from other forum members, but was not satisfied with the results. The Woodslicer made me happy! My Woodslicer was starting to get in need of sharpening, so I tried a very similar blade I had bought from Ellis, a 1/2”, 3tpi, and it is performing every bit as good as the Woodslicer at a lower cost.

-- Bill, Thomasville, GA


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com