LumberJocks

Reply by GOOD LUCK TO ALL

  • Advertise with us

Posted on Suggested process for spraying hardwood edges glued to melamin, pre-finished ply?

View GOOD LUCK TO ALL's profile

GOOD LUCK TO ALL

418 posts in 1728 days


#1 posted 12-29-2013 01:06 AM

The only other thing I can think of would be to make a pronounced seam by putting a very small bevel on both edges before applying, although that may not be a preferable look. Otherwise, wiping a finish is the only other option. Taping and spraying will leave the line, as you know, maybe try some samples and see if a scraper can take off the line without damaging the finish.
Let us know if you find something that works.
I use the pre-finished maple a lot, but I edgeband with the thin (.020) veneer so the edge is relatively easy to finish.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com