LumberJocks

Reply by BalloonGuy

  • Advertise with us

Posted on Looking for good gauge to measure angle for skew scraper

View BalloonGuy's profile

BalloonGuy

93 posts in 2069 days


#1 posted 11-10-2013 04:08 AM

Kim, I have a small (1/2”) skew chisel and the edge is ground at (or nearly) a 75 degree angle. I use this to do final forming of the recess for my bowl bottoms. I’ve done about a dozen this last couple of months this way, most with a 1/8” deep recess (the minimum – and I check it with a caliper depth-gauge) for turning on my SuperNova 2 chuck.

You should be able to use a standard protractor to check the angle of your scraper – though before you waste all that steel, give the skew chisel method a try.

-- Tom Peterson, Omaha, NE


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com