Reply by g_uncle

  • Advertise with us

Posted on Grizzly 690 pulley fell off motor

View g_uncle's profile


5 posts in 1900 days

#1 posted 11-01-2013 12:59 AM

Finally got around to fixing, so far so good.

Ordered a new key and set screws from Grizzly. Service was good and received the package in a few days. You need two of the set screws. There is one in the first valley and one in the third, nothing in the middle. The first picture shows the key and the set screw, I didn’t put anything next to it for scale, but the screws are a 1/2 inch long.

The second picture shows where the set screws go (from the inside). Used blue locktite and it seems pretty snug. Worth mentioning that the old set screws were still in place, and even snug at that, but seems like they lost their bite.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics