LumberJocks

Reply by Hammerthumb

  • Advertise with us

Posted on Cutting through 1.5" oak - the straight way!

View Hammerthumb's profile

Hammerthumb

1391 posts in 662 days


#1 posted 09-19-2013 10:03 PM

Might think about doing this with 3/4” oak and laminating 2 pieces together after the cutous have been made. Make the first cuout in the top piece per your original dimensions. Use that as a template for the bottom piece to cut it maybe 1/4” on each side smaller. After laminating, you would have a rabbit of 1/4” around the hole which could support whatever is goin in the hole or the original cutout of the top piece. By the way, white oak can be waterjet cut. That would give you a very precise cutout.

-- Paul, Las Vegas


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase