LumberJocks

Reply by RussellAP

  • Advertise with us

Posted on Cutting through 1.5" oak - the straight way!

View RussellAP's profile

RussellAP

2944 posts in 913 days


#1 posted 337 days ago

You might just go with the angle of about 10 degrees in the cut out so it will fit back in if you need to put it on again. If you went slow enough with the jig you could do it provided you have a good jigsaw. I cut through 2” hardwood stock all the time with mine without a problem. It does take some sanding to get the lines out.

I have a little Rockwell circular saw with a 3” blade and a laser line that might get through wood that thick. The only other way would be to use some handsaw, but 6/4 oak and a hand saw aint my idea of a good day.

-- A positive attitude will take you much further than positive thinking ever will.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase