LumberJocks

Reply by ADHDan

  • Advertise with us

Posted on Small shop dust collection

View ADHDan's profile

ADHDan

440 posts in 760 days


#1 posted 07-12-2013 04:55 PM

I’ll give each a try. I think what I’ll do is run the 4” S&D pipe along the wall with all those Y-branches to the bench tools, and then end it with a blast gate to 4” flex tube that can go to the planer, the table saw, or anything else that happens to need a 4” connection.

This is my shopping list so far – what do you think of these products, and what do you recommend for blast gates?

http://www.homedepot.com/p/JM-eagle-4-in-x-10-ft-PVC-Sewer-and-Drain-Pipe-1610/202280933
http://www.amazon.com/Clear-Flexible-Hose-Feet-Diameter/dp/B001DT15GK/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=3OKK8VXW14MXJ&coliid=ICGZD57OI09TX
http://www.amazon.com/Woodstock-D3996-Y-Fitting-4-Inch-2-Inch/dp/B00BN5P7KO/ref=wl_it_dp_o_pC_S_nC?ie=UTF8&colid=3OKK8VXW14MXJ&coliid=I1BA9CMM2JFOUU

(I already have plenty of 2.5” tubing with various couplers/adapters from my juryrigged shop-vac DC.)

Thanks again!

-- Dan in Minneapolis, woodworking since 11/11.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase