LumberJocks

Reply by Loren

  • Advertise with us

Posted on Table saw jig with dado blade set up so I don't hurt myself again

View Loren's profile

Loren

7223 posts in 2244 days


#1 posted 437 days ago

I would probably tilt the dado blade and run the board flat
on the table. Fasten a “sacrificial fence” to your saw fence and
raise the dado blade into it. This works well if your blade
tilts to the left.

If the blade tilts right, you don’t need the sacrificial fence.

If your fence can be placed to the left of the blade as
well as to the right, you can use either setup.

Use featherboards.

-- http://lawoodworking.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase