Reply by kdc68

  • Advertise with us

Posted on Grizzly G0661 Table saw burning while cutting

View kdc68's profile


2649 posts in 2245 days

#1 posted 04-29-2013 10:06 PM

Splinter12....Yeah I get saw dust on the floor…but most goes into the dust port. I will assume that is to be expected with the bottom of the saw open…No big deal to me though….I have the Diablo thin kerf blades and they are .098 as well. I have not had to adjust the riving knive….lucky I guess. When I first got the saw I put on the blade, I checked the gap between the blade and the riving knive by placing a straight edge along the blade (against the teeth and not the body of the blade) and was able to slip a .004 feeler gage in there. I have checked a couple times since and no change. Do you think your riving knive is out of alignment?

-- Measure "at least" twice and cut once

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics