LumberJocks

Reply by dhazelton

  • Advertise with us

Posted on how hot is the motor supposed to get?

View dhazelton's profile

dhazelton

1173 posts in 921 days


#1 posted 482 days ago

Your motor is significantly easier than that one – I don’t think it has that centrifugal switch assembly for one, and the capacitor is in the base with the rest of the wiring. I redid the exact same motor a couple of years ago, but it ran fine to begin with. It was just packed with sawdust and I replaced the bearings because mine were replacement sealed bearings that felt dry (that’s why I like the original type like you have). You really only need to take off the end where your pulley is, pull out the inner armature and shaft and leave the outer windings alone in the housing. You may find nothing wrong with your capacitor but it may be a loose connection in the base. Have fun.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase