LumberJocks

Reply by Mainiac Matt

  • Advertise with us

Posted on Air filtration

View Mainiac Matt 's profile

Mainiac Matt

4488 posts in 1082 days


#1 posted 04-11-2013 08:08 PM

I have the Jet AFS-1000 and like it a lot…

imo you need the thick fabric sock type filter to get the fine stuff….

the hot air furnace type pre-filters won’t cut it by themselves…. even if stacked several deep.

I turn mine on pretty much every time I run a power tool and for sure, every time I run my DC.

My shop is 23’x21’ and the filter turns over the entire air volume of the shop very quickly…..

Just the other day I was hand routing and couldn’t really catch the dust at all….. So I ran the filter on high and the shop air was cleaned up in no time.

Grizzly makes a knock off of the Jet for quite a bit less money.

-- Pine is fine, but Oak's no joke!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase