Reply by JustJoe

  • Advertise with us

Posted on Has Anyone Purchased a "Stop Block" set from MLCS

View JustJoe's profile


1554 posts in 2031 days

#1 posted 04-09-2013 11:25 PM

I did look at the picture – there are two stops in the picture and they’re a bookmatched pair, left and right. One for each side of the blade, you flip down or install/use the one you want to use.
And on my tablesaw there are two miter gauge slots – one on the right, one on the left of the blade. The right hand side isn’t necessarily the “waste” side. If I drop a miter gauge in the right hand side, the left of the blade is the waste side. If I put the miter gauge in the left-side slot, then the right side of the blade is the waste side. Or am I missing something else?
EDIT: They are made to fit in a a t-track, which in turn is installed in a board you provide, at a height you desire to fit your needs. That board is then attached to the front of your miter gauge – so miter gauge height isn’t a limitation. You can also put the t-track on the front lip of a miter sled that you build yourself, or you can put it on the router fence that you built yourself.

-- This Ad Space For Sale! Your Ad Here! Reach a targeted audience! Affordable Rates, easy financing! Contact an ad represenative today at JustJoe's Advertising Consortium.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics