LumberJocks

Reply by Airspeed

  • Advertise with us

Posted on Uunifence, anyone figure a way to use both sides of the fence?

View Airspeed's profile

Airspeed

425 posts in 555 days


#1 posted 04-06-2013 09:13 PM

Thanks for the info, I have considered having a friend mill the cast aluminum but his mill is about 12 miles away and I can see myself running back and fourth having him take just a little more off. I may try to work it by hand but I can tell some of it is in the actual extruded fence face, I think it has a slight twist but my eyes aren’t that great! Can get a perfect cut with it shimmed as long as I hold it tight to the fence, I recently cut 198 3/16×1.5×48” strips for a rocker I built and they all looked great. I have no complaints for the Unifence other than I can’t use both sides easily, well at least easier than the way I have to do it now. I would really like to switch sides without stopping. I got the fence used years ago so I doubt Delta will help, mine is actually the older version, it has the two small Allen screws for adjusting the fence, I believe the newer models have ones that looks to be about 1” diameter. The model I have is the only type I’ve seen in person. Thanks again!

-- http://smg.photobucket.com/albums/v655/aaronhero/


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase