LumberJocks

Reply by sprucegum

  • Advertise with us

Posted on Uunifence, anyone figure a way to use both sides of the fence?

View sprucegum's profile

sprucegum

323 posts in 715 days


#1 posted 04-06-2013 08:40 PM

Fortunately I do not have that problem as long as the blade is 90 degrees to the table the fence parallel to the blade. I to have used my saw to resaw thick stock it often shows a slight line where the 2 cuts meet but we are talking thousandths of an inch and I chalk most of that up to the way I held the board against the fence. You are missing half of the usefulness of your fence if you must mess around with shims, I am constantly moving my fence ahead and back, as well as changing to the low profile side and using it on the other side of the blade. I would contact Delta even if the fence is old it should not work that way. If they won’t help you I would get a good double cut milling file and rework the surface of the cast iron part of the fence it could be just a burr or some thick paint causing the problem.

-- A tube of calk and a gallon of paint will make a carpenter what he ain't


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase