Reply by helluvawreck

  • Advertise with us

Posted on Planing a Cedar Bartop Slab?

View helluvawreck's profile


31393 posts in 2892 days

#1 posted 04-04-2013 06:05 PM

We had two 36 inch wide belt sanders (not big enough) at the plant but if you brought that to our plant we would never run that piece of wood through either one of them. Not for any $100 anyways. I’m the one that kept our equipment up and I’ve had to align the conveyors, rollers, and all the other things involved when they get off. We used them to finish sand all the s4s and paneling that came off the 5 molders. They were good industrial sanders and I’ll admit that we babied them but we still ran thousands of feet through them and I would never risk the down time to do that job. If you’re going to be doing stuff like that every so often I would go with the routers.

helluvawreck aka Charles

-- helluvawreck aka Charles,

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics