LumberJocks

Reply by Rick M.

  • Advertise with us

Posted on Weird tablesaw cut problem

View Rick M.'s profile

Rick M.

4116 posts in 1065 days


#1 posted 04-03-2013 10:19 PM

Heat would make sense except it was my first cut of the day, through 4’ of 1/2” MDF so I can’t imagine that was the problem. I installed a splitter hoping it would fix the problem but after switching to a new zero clearance insert and installing the splitter it only happened once in a 4’ cut but it still happened. The blade isn’t very used, freshly cleaned, is relatively sharp. I was just up under the saw yesterday and didn’t see any problems. Tomorrow I’ll switch to a full kerf combo blade and see if it still happens. If the other blades cut fine I’ll send this one out for a sharpening/rebalancing.

-- |Statistics show that 100% of people bitten by a snake were close to it.|


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase