LumberJocks

Reply by Rick M.

  • Advertise with us

Posted on Weird tablesaw cut problem

View Rick M.'s profile

Rick M.

3945 posts in 1032 days


#1 posted 04-03-2013 07:38 PM

It only happens when cutting in the middle of a board, ripping or crosscut. When I say I can hear it, I mean I can hear the blade dig deeper into both side of the cut, sometimes causing a burn, everything else sounds normal. I cleaned the blade and checked all the extension tables for flush/level but it still happened.

It does not happen when: not cutting, cutting on the edge of a board, or taking light cuts. I inspected the belt recently and there is no fraying, hazing or bumps, it looks fine but I won’t rule it out.

@PurpLev – Something is making the blade resonate

Yes, well put. Something is causing a momentary resonance when cutting inside a piece. I made a new zero clearance insert on the off chance that my factory insert (which I normally use with the rip blade) is bobbling and causing the wood to shift. I’m getting ready to go test it.

-- |Statistics show that 100% of people bitten by a snake were close to it.|


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase