Reply by PurpLev

  • Advertise with us

Posted on Weird tablesaw cut problem

View PurpLev's profile


8536 posts in 3671 days

#1 posted 04-03-2013 05:18 PM

like the others suggested my first guess would be the belt.

if you can HEAR it – then take the belt off, and power up the saw and LISTEN. if you can still hear it then it’s the motor shaft bearings or the motor winding. if you can’t hear it then it’s most likely the belt (or the blade arbor). try replacing the belt and see if it clears it.

-- ㊍ When in doubt - There is no doubt - Go the safer route.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics