LumberJocks

Reply by Airspeed

  • Advertise with us

Posted on I just bought a new INCRA 1000SE miter so now I need to square my Unisaw

View Airspeed's profile

Airspeed

413 posts in 528 days


#1 posted 510 days ago

I finally got my table square, took awhile because I tried pivoting the table on the front left bolt, I couldn’t get the back of the table to move, it would move about a 32nd but that’s it and I beat on it hard with a dead blow mallet. I finally gave up and tried pivoting it on the left rear bolt and it finally moved. I got the Incra squared and was pleasantly surprised how much nicer my cuts are! Not just square but much cleaner, I had no idea that the tiny bit of play in the miter slot using my old miters was causing such a problem, I always held the miter tight against the blade side of the slot. I’m sure squaring the table helped a lot as well. I did find one issue about the Incra I don’t like, the protractor flexes making the fence move very slightly back, other than that I’m very happy with it. Thanks again for the help!

-- http://smg.photobucket.com/albums/v655/aaronhero/


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase