LumberJocks

Reply by mdawson2

  • Advertise with us

Posted on I just bought a new INCRA 1000SE miter so now I need to square my Unisaw

View mdawson2's profile

mdawson2

35 posts in 660 days


#1 posted 03-28-2013 02:03 AM

I just aligned my saw last night. I bought a used Grizzly G1023SL and it came with a woodhaven miter gauge. I bought a dial indicator for $15 at harbor freight, took a scrap block wood, drilled a hole on the side of the block and screwed the dial indicator into it. Next I clamped the block to the miter gauge and checked the blade parallel to the miter slot, first by checking the front, then rotating the saw blade back to check the same tooth. Got it perfectly aligned in no time. Next I used the same miter slot to align the fence. It went even quicker.

There are several videos on YouTube that show the process. I found most of them helpful.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase