LumberJocks Woodworking Forum banner

european hinge for inset doors....a slight problem

4K views 7 replies 5 participants last post by  runswithscissors 
#1 · (Edited by Moderator)
hey all

I wanted to use European style hinges (concealed) for the cabinet doors I'll be making soon.. my plan was to go with inset doors. Now you can buy euro hinges for inset doors , that's not a problem.. The problem I just encountered is this"

when you open an inset door with euro hinge the door won't clear the frame completely.. I have a couple of cabinets with pull out drawers that basically need the full width of the opening.
Is there a concealed hinge that will allow the door to clear that opening?

here's a rough diagram showing the problem

Rectangle Parallel Font Symbol Logo
 

Attachments

See less See more
2
#4 ·
I have used these hinges, and they are ok…. but most block the Drawer guide in and reduce the width of the d box to clear the door and hinge. Even with this hinge, the door will clear, but the hinge will still be in the way. block the d box and reduce it's width to clear, and use traditional euro inset hinge.
 
#6 · (Edited by Moderator)
Problem solved, looks like. The Euro fix is standoffs to move the one drawer slide in, like the 3600 series from Bainbridge. They're made to fit the 5mm holes in the box sides.

Blocking out the slide has the same result. These are faster if you've got a bunch to do, but fussy if you're using face frames with varying distances from edge of stile to bulkhead.

Kindly,

Lee
 
#8 ·
I had a similar problem in my kitchen remodel. I needed to have the door open to be flush with the cab sides, as I wanted drawers (more like trays with 2 inch high sides in a floor to ceiling pantry) to be full width of the opening. The only hinges I could find were at Lowes, "Richelleu 1 1/2" X 1 1/2" satin nickel surface hinge." If you look at the picture, you can see that both mounting surfaces are flush when full opened. The odd thing about these hinges is that they only have 2 positions: full open and full closed-no intermediate position. They kind of snap into position, so we always hang onto the door when opening or closing, to avoid slamming and/or stressing the hinges. Although most of the cabinet doors didn't need the flush-when-opened feature, we used them throughout for a uniform look.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top