LumberJocks

Reply by Phil68

  • Advertise with us

Posted on Hitachi C12RSH Dust Port/Connection

View Phil68's profile

Phil68

13 posts in 904 days


#1 posted 03-13-2013 04:24 AM

Just bought the same saw 2 days ago. I use Fernco plumbing fittings to adapt all my equipment to my shop vac… this is the one I used for this saw and it works great. You can tighten one clamp tight to the port on the saw and tighten the other side till the opening provides enough pressure to slip the shop vac hose into….

Fernco 2 in. Drain Waste and Vent x 2 in. Drain Waste and Vent Flexible PVC Coupling

http://www.homedepot.com/p/t/100096490?catalogId=10053&langId=-1&storeId=10051&N=5yc1vZbuf5Z1z114xd&R=100096490

I’ve also used the Fernco fittings to adapt the 4” ports on my bandsaw, jointer and table saw to accept the shop vac hose using Fernco reducers. Easy to put on the machines and readily available to most locally. I just grabbed my calipers, took measurements and wandered the big orange till I found a solution and have been using them since.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase