LumberJocks

Reply by me5269

  • Advertise with us

Posted on New Harbor Freight SCMS

View me5269's profile

me5269

43 posts in 921 days


#1 posted 03-08-2013 01:32 PM

I have had the 10” for a couple years. Had to return the first one due to varies defects, exchange was no problem and checked replacement before leaving the store. Had to remove the fence and file one slot to square it to the blade. The preset angles didn’t lock in that good and ended up filing the slots so the bar would lock in deeper(it was like the pointed rod was 1/4” dia. and the slots were 1/8”).
Dust collection bag is useless. Blade is ok for rough cutting. Replaced it with an 60 tooth negative hook. Most of the time I cut 1/16” longer and then skim cut it or finish it using sled on the table saw.
As noted by 12strings, setup other than vertical is a PITA.
Other than that, i’ve had no problems with it and have been looking at upgrading to the 12” (just can’t justify it)

-- Mike


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase