LumberJocks

Reply by kdc68

  • Advertise with us

Posted on I have a router… now what?

View kdc68's profile

kdc68

1996 posts in 965 days


#1 posted 02-27-2013 04:47 AM

Julie – hjt – there is such a thing as a dado bit. They call them dado cleanout bits. Work great for flattening a dado in cases where the bottoms aren’t flat or quite deep enough. Here’s a link. But hjt a rabbet bit is not the same as a dado bit. You could use cosmic’s advice and use a bit with a top mounted bearing and a template. Be sure the length of the cutter and the thickness of the template corresponds with the depth of the rabbet you wish to cut. In other words, be sure the bearing will ride along the template at the depth you wish the rabbet to be…...Good luck

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_dado.html

-- Measure "at least" twice and cut once


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase