LumberJocks

Reply by GaryL

  • Advertise with us

Posted on What kind of bit do I need?

View GaryL's profile

GaryL

1080 posts in 1584 days


#1 posted 02-25-2013 10:25 PM

60 to 100 grit should do fine. If you don’t have a drill press I would recommend a brad point drill bit. Less chance of it walking on start up. If you do decide to use a forstner freehand with a drill be sure to put good pressure down when starting to prevent it from wondering. Practice on some scrap. This will also let you get your depth dialed in. I put a cheap stop collar on to control my depth.

-- Gary; Marysville, MI...Involve your children in your projects as much as possible, the return is priceless.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase