Reply by knotscott

  • Advertise with us

Posted on Used Grizzly G1023

View knotscott's profile


8017 posts in 3376 days

#1 posted 02-17-2013 09:12 PM

An older 1023 in good condition could be worth $500 or so IMO, but it depends in part which fence is on it. A Shop Fox Classic or Shop Fox Original fence are a plus over some of the older Griz fences. Be sure it’s 3hp single phase too….dunno if they ever offered a 3 phase version, but they did offer a 2hp version. Table flatness isn’t a big deal (within reason)’d take a pretty significant deviation from flatness to effect the cut.

It’s likely a right tilt….the left tilt would have been a G1023SL which didn’t exist 20 years ago….the best way to tell is to look at the front handwheel’s relation to the “smiley” arc. If the blade is at 90°, the handwheel will travel to the left if it’s right tilt, to the right if it’s left tilt.

right tilt:

left tilt:

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics