Reply by mrdull

  • Advertise with us

Posted on looking for blade for a McGraw-Edison 10" Band Saw Model- T6760 16 Type -A

View mrdull's profile


55 posts in 3407 days

#1 posted 02-09-2013 09:57 PM

Lots of people have already suggested having them made, I would only add that when I used to do that I had a welder friend who did his own for his medal cutting blades he could also do mine. I would run the adjustment out to use the longest blade possible, then if I had a premature break and the blade was still sharp we would shorten it an inch or so reweld adjust for the shorter blade and get more use from the same blade.

-- “Duty is the sublimest word in our language. Do your duty in all things. You cannot do more. You should never wish to do less.” General Robert E. Lee, C.S.A.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics