LumberJocks

Reply by johnstoneb

  • Advertise with us

Posted on Kitchen Pullout Drawer

View johnstoneb's profile (online now)

johnstoneb

691 posts in 831 days


#1 posted 02-09-2013 03:32 PM

You can attach the bottom to the bottom of the sides but it won’t last long before the load in the drawer pushes the bottom off. Most drawers have a dodo(groove) cut around the inside of the drawersdes and front and back the bottom slides into the groove and is supported on all four sides. The bottoms are generally not glued in to allow moisture movement.
To control splintering, if you’re on a table saw keep the good side up. You can tape the kerf area on bottom side with masking tape and this will help some.
If you are using a portable saw good side down.

-- Bruce, Boise, ID


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase