LumberJocks

Reply by FirehouseWoodworking

  • Advertise with us

Posted on What Is It?

View FirehouseWoodworking's profile

FirehouseWoodworking

635 posts in 2019 days


#1 posted 01-30-2013 02:35 AM

Looks like a miter gauge for a non-tilting saw. It could come in handy if you can adapt it to your saw, for instance to but the miters for the side pieces of shadow boxes or other small boxes.

You might be able to adapt it to your saw by either drilling new holes in the base plate for the miter slot runner.

Another option might be to move the runner to the second set of holes, then add a piece of wood to build up the tilting plate. This would get your workpiece to the blade so that you could make the miter cuts. Good luck!

Cheers!

-- Dave; Lansing, Kansas


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase