LumberJocks

Reply by Fred Hargis

  • Advertise with us

Posted on Raised Panel & Divided Light Cabinet Doors

View Fred Hargis's profile

Fred Hargis

1796 posts in 1152 days


#1 posted 01-28-2013 08:30 PM

I did the cabinet below with the 12 light door. I used a Freud premier R/S bit set to it. The divided light was to be 3 horizontal muntins and 2 vertical ones. I could not get the worked out (tried for 2 weeks) so with the Freud set I wound up with the 2 verticals, but the horizontal ones number 9, and each one has a stub tenon at the end. The set I used was the 99-763, but there are other sets available from other companies that do much of the same thing. I should point out that on my cabinet, the profiles of the panel door and the divided light door do not match. The radius of the round over is different….that’s was the way the original was built.

-- Our village hasn't lost it's idiot, we sent 'em to Washington.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase