LumberJocks

Reply by William

  • Advertise with us

Posted on Will a finish garage woodworking shop stop rust?

View William's profile

William

9073 posts in 1508 days


#1 posted 01-27-2013 11:59 AM

I am in a large shop, but there is no insulation at all, only cinder block walls.
When I first got into wood working, and didn’t know better, rust was a major headache for me.
After I learned the trick though, I have little problem with rust now.
The trick is, any (and I mean ANY) surface that is not covered with a protective coating of something, such as paint, gets Johnson’s Past Wax.
I rub it on (be generous), let it dry, and buff it off.
If in doubt about any surface, wax again. I do this to all exposed surfaces at about one month interevals, or if I happen to notice a spot of rust.
I have an old random orbit sander with 220 grit sandpaper on it. If I notice rust, I hit the rust spot with the old sander before waxing. After sanding, use a rag with mineral spirits to wipe the dust from the sanded rust off before waxing. If not, the rust is under the wax still working its magic.

Is all this a pain in the rear?
Yes it is, but once you form a habit of doing it, it becomes routine and it is a lot less hassle tha dealing with rusted tools.

-- http://wddsrfinewoodworks.blogspot.com/


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase