LumberJocks

Reply by Kindlingmaker

  • Advertise with us

Posted on Need some help with chisels/sharpening

View Kindlingmaker's profile

Kindlingmaker

2654 posts in 2213 days


#1 posted 12-21-2008 09:29 PM

I use 220 then 320 then 400, (mostly because that is what I have). I use a buffing wheel to then buff the bevel side ONLY until the burr is gone. The 400 grit will give a really sharp edge without the buff. Each grit does not normaly need 100 strokes, try 30 or 40… then buff or strop, (Use the back of your belt).

-- Never board, always knotty, lots of growth rings


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase