Reply by DavidNJ

  • Advertise with us

Posted on What is the Best Blade for Cutting MDF on a Table Saw?

View DavidNJ's profile


389 posts in 1988 days

#1 posted 01-24-2013 08:21 PM

Just talked to a blade sharpening service. They recommended an 80T Hi-ATB (30+°) and 0° or negative hook. They say that is what their customers use successfully. This would be inline with the Freud recommendation which was a 38° Hi-ATB with a -2° hook.

Popular Tools lists that blade in thin and regular kerfs. They say next to the thin kerf (model LM1080X) max cut 1”. Presumably that specification was experience based.

This article in PFM Production (PFM= Picture Framing Magazine) also talks about it; it appears to recommend an ATB/R blade:

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics