LumberJocks

Reply by Airframer

  • Advertise with us

Posted on Simple Dust Collector Design Help

View Airframer's profile

Airframer

2574 posts in 638 days


#1 posted 01-24-2013 07:39 AM

So, is it the size of the motor or the impeller that might be the issue? I only need a small unit for my shop right now so I am going to give this a try first.

Here is the small “zone” that I need it in right now. If I get any more equipment I will definately need to up grade I’m sure.

The zones are marked in red. The large zone under the drill press is where I’l like it to be setup with a hose going to the press for when I use the sanding drums and forstner bits etc with a branch running off to the scroll saw. So there will probably be only about 6’ of tubing involved.

I did some searching and I am wrapping my head around how a shop vac works (never really thought about it before) and I think I can use to litter tubs for this. One for the motor and motor filter and the other for the cyclone collector.

So far I have 2 no’s and a yes lol. Any other thoughts before I dive in to this?

-- Eric - "I'm getting proficient with these hand jobbers. - BigRedKnothead"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase