LumberJocks

Reply by joein10asee

  • Advertise with us

Posted on Delta 16 inch scroll saw missing tension release lever

View joein10asee's profile

joein10asee

2763 posts in 510 days


#1 posted 464 days ago

This could be made easily in your shop without any “special” tools.

Is part #42 still there? If so, then #44 looks to be just a small rod with a threaded hole in it, held into part #42 with 2 “Jesus clips”. .
.

#45 and #46 could be just a small spring and a washer (off the shelf type items)
.

The lever #47 is not much more than a threaded rod with a handle of sorts attached.

For #44 you could use a piece of all-thread (threaded rod), drill a small hole in it and run the handle rod (#47) thru it and double nut it into place.

-- Perform A Random Act Of Kindness Today ... Pay It Forward


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase