LumberJocks

Reply by bbasiaga

  • Advertise with us

Posted on Problems with table saw tripping circuit

View bbasiaga's profile

bbasiaga

112 posts in 719 days


#1 posted 01-10-2013 08:47 PM

If you coudl get a GFCI outlet, or GFCI breaker it would tell you if the circuit is tripping because something is going to ground (the GFCI would trip, the main breaker should not), or if the motor is overamping (mean breaker trips, GFCI does not).

If you check all your connections to ensure they aren’t exposed or loose enough that they vibrate and touch (if the hot touches the neutral, it would pop the breaker right away, or if the hot is touching the ground someplace it could do teh same and/or trip the GFCI), and everything is OK, then the problem is certainly in the motor.

-Brian

-- Part of engineering is to know when to put your calculator down and pick up your tools.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase