Reply by JesseTutt

  • Advertise with us

Posted on Problems with table saw tripping circuit

View JesseTutt's profile


854 posts in 2136 days

#1 posted 01-09-2013 01:46 PM

Call Grizzly tech support and ask them. I would try to get them to send you another motor.

Are you comfortable with electricity? If so, open up the receptacle and connect a volt meter between one of the hot lines (one should be black and other red) and the neutral (white) wire. What is the voltage? Now watch the meter and start the saw, does the voltage change (drop) as the saw attempts to start? Then try the other hot line.

A mechanical thing to try would be to remove the belt and see if it continues to happen. If it does try loosening all but one of the motor mount screws and see if it continues to happen.

-- Jesse, Saint Louis, Missouri

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics