Reply by GaryL

  • Advertise with us

Posted on Blumotion slides help

View GaryL's profile


1099 posts in 2854 days

#1 posted 01-09-2013 12:58 PM

The “clips” aka “locking devices” (I know, strange name) front holes, the ones that go into the drawer box front, not bottom, are angled slightly.
And yes, the jig has nothing to do with the drawer box constuction. It registers against the box for the locations of pilot holes and rear hole. The notch needs to be cut in by the fabricator. Lately I have been cutting the hole bottom off the back drawer piece and gluing and stapling the drawer bottom to the back. This is with Ultraply drawer bottoms, so not so much to worry about movement.

-- Gary; Marysville, MI...Involve your children in your projects as much as possible, the return is priceless.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics