LumberJocks Woodworking Forum banner

Oil Base and Shellac Base Primer...

1K views 2 replies 2 participants last post by  JerseyMike79 
#1 · (Edited by Moderator)
got on my hardwood floor while i was painting. There are several spots on the floor that made its way around my tarp. The floor is finished with a water-based urethane topcoat. Now, can I use a little mineral spirits and denatured alcohol to take out these spots, or will it remove the water-base topcoat? Please save me…from my wife!
 
#2 ·
I hate when that happens!

Are these droplets? You could remove by simply and carefully scrape (finger nail). If its water based, a little mineral spirits should not hurt the finish. Work in small areas, and quickly cleanup with a little soapy water, followed by a bit of buffing.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top