Reply by pintodeluxe

  • Advertise with us

Posted on Need a setup for cutting sheet goods

View pintodeluxe's profile


5622 posts in 2780 days

#1 posted 01-02-2013 09:24 PM

I use Joe’s method for breaking down plywood sheets. If I need to make a rip cut, I use a shop made jig made from a 10’ long mdf 1×6 and some 1/4” plywood. For crosscuts I use an Emmerson clamp and guide.
Then off to the tablesaw, where an outfeed table is critical.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics