LumberJocks

Reply by me5269

  • Advertise with us

Posted on Ripped Cherry warped

View me5269's profile

me5269

43 posts in 2311 days


#1 posted 01-02-2013 04:01 PM

I’ve used Dallas’s suggestion for steaming on some 13” x 14” 3/4 cherry (2 1×8 glue-ups that had been sitting for a few years) that had cupped. Bought a cheap steam iron (this process will ruin the base plate), soaked an old towel with water, covered the wood and “ironed” it on highest temp. The wood actually cupped in the opposite direction after about 5 minutes of ironing. Then clampled the pieces (4) together, with stickers between them, on the end of workbench for about a week. I used them the day they were unclamped in case the cupping returned. Have never tried it on a warped board.

-- Mike


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com