Reply by SWIDon

  • Advertise with us

Posted on Crosscut Sled for Bosch 4100? -- New 4100 Owner

View SWIDon's profile


12 posts in 1989 days

#1 posted 01-01-2013 01:08 PM

Great saw I love mine. I built a cross cut sled for mine to cut 10” tall baseboard since my non sliding CMS wouldn’t do it. I think the longest pieces were 14’ long. I just attached extensions to the front an back rails of the sled and attached another piece of ply that I used for the base to the other end of them. It rides on a roller stand. No pics because it is not pretty.

Depending on what your projects are I would get a couple of roller stands for long rips. Most of my projects have been home improvement related so it seems long pieces are the norm (trim, shimming walls, jamb extensions, etc.)

I ended up buying a different miter gage (Incra 1000SE). The miter slots are slightly wider than 3/4” by a few thousandths. I really had to crank on the adjusters to get them snug with the slot. I use the stock one on the band saw and router table.

Good luck with your new tool.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics