Reply by knotscott

  • Advertise with us

Posted on Rockwell/Delta Model 10 TS

View knotscott's profile (online now)


7980 posts in 3342 days

#1 posted 12-27-2012 02:58 AM

Love the story. The saw looks great….congrats on a nice saw and a great family! With good alignment and the right saw blade, you should have little trouble with 8/4”, and you just might get through 12/4” too. The blade that’s on it needs a good cleaning, and has too many teeth to rip 8/4”, but might work ok for thinner materials if it’s still sharp. Decent blades start at under $30.

The Delta T2 is often regarded as the best bang for the buck going….it’s roughly $168 shipped from You can sell the stock fence to offset costs. Being a Delta saw, the T2 might even be a direct bolt on.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics