LumberJocks

Reply by JJohnston

  • Advertise with us

Posted on Router table top isn't flat. Need some advise.

View JJohnston's profile

JJohnston

1594 posts in 2039 days


#1 posted 12-16-2012 04:16 PM

Sounds about right. I’m not sure I’d worry about the table dropping off beyond the miter slot. Is “left” in the second picture “toward the camera” in the first? Is the router in the blue box?

You might consider deeper angle braces to replace the ones to the right of the blue box. “Deeper” meaning a longer leg that sticks down. They look like they’re only about half as deep as the main one that goes along the edge.

But before you do any of that, just loosen the screws that tighten the table top to those braces and stick a business card or two in between there, on either side of that center screw, retighten and see how big a change you get.

-- "A man may conduct himself well in both adversity and good fortune, but if you want to test his character, give him power." - Abraham Lincoln


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase