LumberJocks

Reply by PRGDesigns

  • Advertise with us

Posted on Cutting Plexiglas on a CNC for a WOOD project

View PRGDesigns's profile

PRGDesigns

207 posts in 972 days


#1 posted 12-02-2012 05:22 AM

I am cutting a 5.6” circle with one (qty) 1/8” screw hole in the middle and four (qty) 1/8” screw holes along the outside perimeter. I was also planning on cutting a countersink for the screws if possible. My current plan is to use a 120 degree v-bit for the countersinks and make a very shallow cut. I like the sandwich idea between the offcuts of BB plywood to hold down the material. I think I can reuse the same hold down boards for the 24 (qty) circles I need. Thanks.

-- They call me Mr. Silly


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase