LumberJocks

Reply by bruc101

  • Advertise with us

Posted on Lacquer

View bruc101's profile

bruc101

568 posts in 2193 days


#1 posted 11-21-2012 03:52 AM

Deft lacquer is one of the best on the market and we use it often on everything. We buy it by the case.

We usually thin it anywhere from 10% to 50% depending on how we need to build the coats on a project, temperature and humidity.
For average spraying 10% is enough. We spray it with conventional and hvlp systems almost on a daily basis.

Some hvlp systems may choke it a little so more thinning may be necessary. At 10% reduction we put on five coats sanding between coats.

On the can it says not for spraying..that’s to get by the California VOC laws.

-- Bruce http://plans.sawmillvalley.org http://www.sawmillgirls.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase