LumberJocks

Reply by knotscott

  • Advertise with us

Posted on 12 inch table saw 220 volt now needs to be 120 volt help!!!

View knotscott's profile

knotscott

5363 posts in 1970 days


#1 posted 615 days ago

Some motors are convertible between 110v and 220v….it should say right on the motor plate. If the motor is convertible and is less than 2hp as stated on the motor plate, it stands a good chance of being able to run on a standard 110v circuit. As Bert stated, it’ll really boil down to the amp draw of the motor, and the particular circuit your going to run it on.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase