Reply by Charlie

  • Advertise with us

Posted on Dimensions of the Bosch 1617

View Charlie's profile


1100 posts in 2309 days

#1 posted 11-12-2012 05:40 PM

Hang on, Cole. I’ll go out and measure mine…

OK, the diameter of the fixed base is 6 inches. There’s an adjuster though that would “stick out” of that 6 inch diameter circle by half an inch or so. Height is variable depending on where you have it latched, but if you’re looking for a good height under the table, mine is 12 and a half inches from the underside of the plate, to the bottom of the cavity in which the router lives. This gives me JUST enough room to drop the motor out of the base from underneath. Otherwise I have to remove my fence, lift the router plate, base and motor out through the top.

That what you’re looking for?

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics